Differences

This shows you the differences between two versions of the page.

--- eop:home_electronics:smart_home_hubs [2022/01/05 15:05] – io55admin
+++ eop:home_electronics:smart_home_hubs [2022/04/22 22:35] (current) – io55admin
@@ Line 1: / Line 1: @@
 ====== Smart Home Hubs ======
+All "hub" devices that are meant to unify the functions of a home's "smart devices", presumably all from the same manufacturer as the hub. These devices appear to mostly be Linux/ARM-based.
 ===== Staples Connect Hub =====
-=== Operating Systems ===
+==== Operating Systems ====
-== Linux ==
+=== Linux ===
 >To ensure that the bootloader can not see the environmental variables at boot, timing is critical
@@ Line 11: / Line 13: @@
 This little “smart hub” (presumably, a device linking together a series of smart home devices) has a method which affords the user root access. From there, one can also enable SSHing to this device.
-[[https:%%//%%www.exploitee.rs/index.php/Staples_Connect_Hub%E2%80%8B%E2%80%8B|https://www.exploitee.rs/index.php/Staples_Connect_Hub]]
+[[https://www.exploitee.rs/index.php/Staples_Connect_Hub%E2%80%8B%E2%80%8B|https://www.exploitee.rs/index.php/Staples_Connect_Hub]]
 ===== Wink Hub =====
-=== Operating Systems ===
+==== Operating Systems ====
-== Linux ==
+=== Linux ===
 >this causes U-Boot to drop into a interactive shell over UART
@@ Line 25: / Line 26: @@
 Many methods exist for this “Smart hub”, although only one appears to still be functional after various firmware patches. It involves shorting the NAND’s pins upon kernel reading. From there, a root shell can be accessed by altering kernel arguments.
-[[https:%%//%%www.exploitee.rs/index.php/Wink_Hub%E2%80%8B%E2%80%8B|https://www.exploitee.rs/index.php/Wink_Hub]]
+[[https://www.exploitee.rs/index.php/Wink_Hub%E2%80%8B%E2%80%8B|https://www.exploitee.rs/index.php/Wink_Hub]]